Nuvis IP camera Firmware Upgrade via IVMS_4200
Posted: October 4th, 2016, 12:11 pm
In some case to upgrade a IP camera that is connected direct on the back of the Nuvis NVR in remote location is not easy. In this case we need to use IVMS-4200 to accomplish this we need to follow the step :
1-Open IVMS-4200>Control Panel>Device Management>server> select the NVR that the IP camera is connected to
2-Click Remote Configuration>System Maintenance>IPC Upgrade> select the camera> select the Firmware file>click Upgrade
3- You need to wait for the file to be upload to the IP camera and to reboot.
1-Open IVMS-4200>Control Panel>Device Management>server> select the NVR that the IP camera is connected to
2-Click Remote Configuration>System Maintenance>IPC Upgrade> select the camera> select the Firmware file>click Upgrade
- Capture3.PNG (90.21KiB)Viewed 304 times
3- You need to wait for the file to be upload to the IP camera and to reboot.