Zero Channel

[Brian]

Sometimes the user needs to remote view a lot of cameras simultaneously from web browser or CMS software, in order to decrease the bandwidth requirement in case that the image quality is not strictly required, zero channel encoding feature is supported as an option for users.

How to Access from the RECORDER:

1. Right click your mouse and select MENU

2. Select CONFIGURATION

3. Look on the left hand panel and select LIVE VIEW

4. Look at the top tab on ZERO CHANNEL ENCODING

5. You will see ENABLE ZERO CHANNEL ENCODING please check this box then apply

You have set your Zero Channel on your system. To view your Zero Channel clink on LIVE VIEW and select the channel on the left hand side panel to display on the main screen.



How to access from web remote

1. Click on Configuration

2. On the left panel please select VIDEO/AUDIO

3. Top tab select CHANNEL-ZERO

4. Put a check in the box beside ENABLE CHANNEL-ZERO ENCODING

You have set your Zero Channel on your system. To view your Zero Channel clink on LIVE VIEW and select the channel on the left hand side panel to display on the main screen

channelzerro1.png (15KiB)Viewed 314 times