BNC compression Gold
Posted: September 15th, 2017, 5:45 pm
BNC compression Gold
1. place cable on the striper
2. peel the jacket off
3. fold ground braid
4. Mark cable.
5. Push cable to connector.
Maske sure that it goes to the maker otherwise center conductor would not touch the center pin of connector.
6. Compress it.
1. place cable on the striper
2. peel the jacket off
3. fold ground braid
4. Mark cable.
5. Push cable to connector.
Maske sure that it goes to the maker otherwise center conductor would not touch the center pin of connector.
6. Compress it.
- BNCcompression.JPG (37.43KiB)Viewed 1792 times