I have installed the SADP tool however I am still unable to detect my device.
Posted: September 30th, 2016, 4:31 pm
You may need to update the WinPcap utility.
Close the SADP software.
download and install the latest WinPcap.
http://www.winpcap.org
Then run the SADP software again.
Also, make sure the computer is connected to the same subnet as the NUVIS devices.
If you are still having issue, download the latest SADP software.
Close the SADP software.
download and install the latest WinPcap.
http://www.winpcap.org
Then run the SADP software again.
Also, make sure the computer is connected to the same subnet as the NUVIS devices.
If you are still having issue, download the latest SADP software.