Nuvis Box camera(Nuvis882) setup to capture License Plate
Posted: January 7th, 2016, 3:54 pm
1. Use mega pixel auto iris lens .
-2.8~12mm for 10~30ft distance
-5~50mm for 30~70ft distance
-5~100mm for 70~150ft distance
2. Use Strong IRs to capture license plate in the night.
3. Camera Setup
1. Set "Switch Day and Night : scheduled-switch"
2. Set "Day/Night switch :Night. "
Also you can select "scheduled" too but Avoid "Auto" because it does not give gain control option."
3. Set Day as below.
4. Set Night as below.
-Exposure time : the shorter, the darker. Set between 1/500 ~1/750 depending on the light condition and speed of vehicle.
-Gain: The smaller, the darker. Set between 5~15 while looking at the license plate at night.
-2.8~12mm for 10~30ft distance
-5~50mm for 30~70ft distance
-5~100mm for 70~150ft distance
2. Use Strong IRs to capture license plate in the night.
3. Camera Setup
1. Set "Switch Day and Night : scheduled-switch"
2. Set "Day/Night switch :Night. "
Also you can select "scheduled" too but Avoid "Auto" because it does not give gain control option."
- config.jpg (114.04KiB)Viewed 295 times
3. Set Day as below.
- day.JPG (41.05KiB)Viewed 293 times
4. Set Night as below.
-Exposure time : the shorter, the darker. Set between 1/500 ~1/750 depending on the light condition and speed of vehicle.
-Gain: The smaller, the darker. Set between 5~15 while looking at the license plate at night.
- night.JPG (36.48KiB)Viewed 293 times