Login to IPC via NUVIS NVR from outside network
Posted: December 21st, 2015, 4:43 pm
1. Turn on "Virtual Host"
2. Go to "Camera Management" and move mouse point on IPC address underneath "Connect".
3. Check the port number and list the port on the port-forwarding rule in router.
@@@@@ It only supports Nuvis IPC @@@@@
INTERESTED IN VIEWING CAMERAS VIA WEB
You want to take the port number from the camera
EXAMPLE:
You will take the ending port number 65001 which is camera one and the NVR public IP address and place them in the
router. If you have more than one camera please include each camera port number forwarded with the NVR PUBLIC IP number.
This way if you want to log directly into the camera to make changes you would log in as the example NVR PUBLIC IP ADDRESS 192.168.10.62: INTERNAL CAMERA PORT NUMBER 65002. or 192.168.10.62:65003 for camera 3 and so on, and so on.
2. Go to "Camera Management" and move mouse point on IPC address underneath "Connect".
3. Check the port number and list the port on the port-forwarding rule in router.
@@@@@ It only supports Nuvis IPC @@@@@
- VirtualHost.jpg (186.93KiB)Viewed 317 times
INTERESTED IN VIEWING CAMERAS VIA WEB You want to take the port number from the camera
EXAMPLE:
- PORTNUMBER.PNG (52.58KiB)Viewed 211 times
You will take the ending port number 65001 which is camera one and the NVR public IP address and place them in the
router. If you have more than one camera please include each camera port number forwarded with the NVR PUBLIC IP number.
This way if you want to log directly into the camera to make changes you would log in as the example NVR PUBLIC IP ADDRESS 192.168.10.62: INTERNAL CAMERA PORT NUMBER 65002. or 192.168.10.62:65003 for camera 3 and so on, and so on.