[SP27T/37T] 'Auto Iris Setup' issue with Apollo &Titan
Posted: October 1st, 2015, 11:48 am
<Right Setup for SP27T/SP37T>
1. DVR setup.
:System Setup/Camera/PTZ setup/Detail/Auto Iris :On
when Iris is turned off once,
all the exposure setup are turned off together and do not come back by itself even when Iris is turned on.
So need to change that manually as below.
2. Camera Setup( hit preset 95 to go into camera menu)
: Dome Camera Setup/Camera Setup/Auto Exposure Setup/
-Day/Night : Auto
-Iris : Auto
-Shutter : ESC
-AGC : low
-SSNR : low
-Sens Up : auto
<Right Setup for SP10AC/SP200/SP230/SP270 >
1. DVR Setup
1.1 Setup/Camera/PTZ setup/Detail/Auto Iris : off
2.2 Go to PTZ control interface of DVR
-Hit Iris+ button more than once
1. DVR setup.
:System Setup/Camera/PTZ setup/Detail/Auto Iris :On
when Iris is turned off once,
all the exposure setup are turned off together and do not come back by itself even when Iris is turned on.
So need to change that manually as below.
2. Camera Setup( hit preset 95 to go into camera menu)
: Dome Camera Setup/Camera Setup/Auto Exposure Setup/
-Day/Night : Auto
-Iris : Auto
-Shutter : ESC
-AGC : low
-SSNR : low
-Sens Up : auto
<Right Setup for SP10AC/SP200/SP230/SP270 >
1. DVR Setup
1.1 Setup/Camera/PTZ setup/Detail/Auto Iris : off
2.2 Go to PTZ control interface of DVR
-Hit Iris+ button more than once