Turn off Park Action : Call Preset 110
<Dwell time setting>: (for residence time between preset points)
Call 52 preset point:, short residence time (about 5 seconds)
Call 53: residence time (about 8 seconds)
Call 54:, long (about 13 seconds)
<Camera Reset>
Restore factory settings: call preset 61
Remove all presets: call preset 63
<Lens Setting>
For the lens part, call the following preset bit function description
84----Lens reset (only the reset of lens set, not empty the lock focus data)
103----Lens initialization (empty lock focus data, lens back to original)
104----Lock focus (the lens is locked according to the set light path)
Statistics: Posted by Wade — February 29th, 2024, 11:36 am
]]>
Green & White 3
green 6
Statistics: Posted by Wade — February 17th, 2023, 10:50 am
]]>
76 Pattern 2
77 Pattern 3
78 Pattern 4
81(41)Auto Day/Night
82(42)Night Mode
83Day Mode
91(31)Call A-B scan
1Set left point of A-B scan
2Set right point of A-B scan
96Guard tour 3
97Guard tour 2
98(38)Guard tour 1
99Pan scan
Statistics: Posted by Wade — December 2nd, 2020, 12:17 pm
]]>
rtsp://192.168.0.98:554/Streaming/Channels/2 sub stream
Statistics: Posted by Wade — November 25th, 2020, 9:07 am
]]>
Statistics: Posted by Cdin — October 26th, 2020, 9:36 am
]]>
Statistics: Posted by Cdin — April 20th, 2020, 3:52 pm
]]>
-System/Security/Security Service/ uncheck " Enable Illegal Login Lock"
-change 8000 port to 37777
<Dahua NVR>
-protocol : onvif
-port : 80
-type onvif user ID/PW you created on camera
Statistics: Posted by Wade — December 3rd, 2019, 2:48 pm
]]>
Password: 12345
<Plug &Play with Nuvis NVR>
fully compatible
<IP Tool >
1. SADP tool: IP, server port change but gate way , http port won't change with SADP tool.
( this will be addressed )
2. Edge Easy Tool : fully compatible. available at
ftp://174.78.149.91:48633/Edge/
<model name showing on the IP tool & SADP Tool>
2MP camera: IPG-7820
5MP camera: IPG-8150
<How to factory default>
we need to run team viewer and send it to factory.
<baud rate>
For old version, like" UPDATA_IPG-7930PXS_V1.0.18_20190726Z1S(60Hz)" , the baud rate is 9600.
For new version, like "IPG-7930PSS-v1.0.23-20200714ZBV", the baud rate is 115200.
Each baud rate has the corresponding hardware.
For example, The camera upgrade with firmware "UPDATA_IPG-7930PXS_V1.0.18_20190726Z1S(60Hz)" as default before leaving the factory, the baud rate is 9600.
After you upgrade the camera to a new firmware "IPG-7930PSS-v1.0.23-20200714ZBV", you should also change the baud rate to 115200.
<when lens won't focus>
Call Preset 103 : clear lens memory
Loose the screw that hold the lens.
Move the lens up and down manually to focucs on a clear position.
(don't rotate the top of lens left or right)
fix the screws
Call Preset 104 : lens initial
Statistics: Posted by Wade — August 23rd, 2019, 4:39 pm
]]>
]]>
Main stream: rtsp://admin:123456@192.168.0.123/stream0
Sub-stream: rtsp://admin:123456@192.168.0.123/stream1
The above url will deliver both audio and video simultaneously.
admin: username of RTSP
123456: password of RTSP
192.168.1.123: IP address of your security camera
Stream0 for main stream
stream1 for sub stream
If users wish to play audio or video solely, here’s the url path:
Mainstream only video: rtsp://admin:123456@192.168.0.123/video1
Sub-stream only video: rtsp://admin:123456@192.168.0.123/video2
Audio: rtsp://admin:123456@192.168.0.123/audio
2. Neo PTZ camera
2.1. Neo-520X
rtsp:ip/1/h264minor
User: admin
Password: N/A
Main stream: rtsp://192.168.1.18/1/h264major
Sub-stream: rtsp://192.168.1.18/1/h264minor
MJPEG: rtsp://192.168.1.18/1/mjpeg
IE Screenshot：
http://192.168.2.165/jpgimage/1/image.jpg
http://ip/mjpgstreamreq/1/image.jpg
Statistics: Posted by Wade — July 6th, 2018, 2:58 pm
]]>
2.Set a patrol for preset 1, 2, 3
(1)Set preset 92, call preset 1 to enable patrol 1
(2)Call preset 1, 2, 3
(3)Set preset 92, call preset 9 to save the setting of patrol 1
3.Set the time to you want to stay on each preset of patrol 1
(1)Set preset 92, call preset 10 to enable time setting of preset
(2)Call 15 to view 15s on each preset
4.Set the moving speed among presets. The number is bigger, the speed is faster
(1)Set preset 92, call preset 11 to enable speed setting
(2)Call 10 to set the speed to 10
5.You want PTZ to go back patrol after become idling 3 minutes later, I checked with factory, it can only set max 60s.
(1)Call preset 94, call preset 9 to set patrol 1 as park patrol. (preset 9 stand for patrol 1, preset 1-8 stands for preset 1-8)
(2)Call preset 94, call preset 33 to go back patrol after 60s. (preset 31 stand for 10s, preset 32 stand for 30s, preset 33 stand for 60s)
Statistics: Posted by Wade — April 25th, 2018, 10:47 am
]]>
Statistics: Posted by Cdin — April 19th, 2018, 12:38 pm
]]>
Statistics: Posted by Wade — January 29th, 2018, 2:35 pm
]]>
Statistics: Posted by Cdin — January 24th, 2018, 10:09 am
]]>
Statistics: Posted by Wade — January 17th, 2018, 3:59 pm
]]>